FindGastro

Anfim HC-600 vs Eureka Helios 65: Footprint & Fit

The Anfim HC-600 and Eureka Helios 65 compete for counter space with different physical profiles. We compare their dimensions, power density, and workflow impact to help you choose the right grinder for your specific kitchen layout.

If your counter width is strictly between 220 mm and 350 mm, the Eureka Helios 65 is your only option. The Anfim HC-600 requires the full 350 mm width but offers a larger 1.5 kg hopper. For high-volume shifts exceeding 1,200 g of beans, the Anfim’s capacity is safer. For tighter spaces or lower volume, the Eureka fits better.

FindGastro Editorial8 min read

Products compared

Category guide →
On this page

The two machines

Product Brand Category Key specs
A Anfim HC-600 On Demand Coffee Grinder, 64 mm, Black Anfim Coffee Grinders Power Source: Electric; Voltage: 230 V; Power: 350 W
B Eureka Helios 65 Automatic Coffee Grinder, Black Eureka Coffee Grinders Power Source: Electric; Voltage: 220 V; Power: 280 W

What actually separates them

Choosing a commercial coffee grinder often starts with a simple measurement: how much counter space do you have? The Anfim HC-600 and Eureka Helios 65 represent two distinct approaches to fitting into a busy kitchen. One prioritizes a wider, shallower footprint with higher bean capacity, while the other offers a narrower, deeper profile. Understanding these physical differences is critical before committing to a purchase.

Beyond just width and depth, the internal volume and power draw of these machines affect your electrical load and heat management. The HC-600 packs 350 W of power into a larger box, while the Helios 65 uses 280 W in a slightly smaller volume. These numbers influence not just the installation requirements but also the operational efficiency during peak morning rushes.

The space math

The Anfim HC-600 measures 350 mm wide by 210 mm deep, creating a footprint of 0.0735 m². This wide, shallow design allows it to sit comfortably against a backsplash without protruding too far into the workflow. In contrast, the Eureka Helios 65 is significantly narrower at 220 mm but deeper at 250 mm, resulting in a footprint of 0.055 m². The Eureka saves nearly 25% of linear counter width, which is vital for narrow stations.

When you calculate the total box volume, the HC-600 occupies roughly 0.041 m³, while the Helios 65 takes up about 0.033 m³. The HC-600 is also heavier at 13 kg compared to the Eureka’s 12 kg. This weight difference is minor, but the HC-600’s higher power density (8.4 kW/m³ vs 8.5 kW/m³) suggests it may generate more ambient heat per cubic inch of space, a factor to consider in enclosed cabinets.

Doors, drawers and service access

The HC-600’s 210 mm depth means it leaves more room in front of the grinder for dosing cups or portafilters, but its 350 mm width demands a clear zone on either side if you need to access the dual-sided aluminum dispenser. The Eureka’s 250 mm depth pushes it further out, potentially interfering with front-facing drawers or workflow paths. You must measure your available depth carefully, as the Eureka’s extra 40 mm can be the difference between a tight fit and a functional workspace.

Height differences also play a role in ergonomics and clearance. The HC-600 stands at 570 mm, while the Helios 65 is 30 mm taller at 600 mm. If you have overhead shelving or lighting rigs, the Eureka’s extra height could be a constraint. Conversely, the HC-600’s lower profile might make it easier to reach for manual adjustments or cleaning without straining your back during long shifts.

Utilities and installation

Electrical requirements differ slightly between the two units. The Anfim HC-600 draws 350 W at 230 V, while the Eureka Helios 65 uses 280 W at 220 V. Although the power difference is only 70 W, the voltage mismatch means you cannot simply swap them without verifying your local circuit. You must confirm the supply phase and voltage stability with your dealer before ordering, as neither spec sheet explicitly states the phase requirement for either machine.

Estimated annual energy consumption assumes 8 hours of operation per day, 300 days a year, at full nameplate power. Under this scenario, the HC-600 would consume 840 kWh/year, while the Helios 65 would use 672 kWh/year. While actual duty cycles are lower, this data highlights the HC-600’s higher potential load. Ensure your dedicated circuit can handle the peak draw without tripping breakers during simultaneous espresso extraction and grinding.

Which kitchen each one fits

The Anfim HC-600 is ideal for high-volume cafes where bean capacity is paramount. Its 1.5 kg hopper reduces the frequency of refills, keeping the barista focused on extraction rather than logistics. The 64 mm flat burr and 2.5, 3.0 g/s grinding speed provide consistent output for busy shots. However, if your workflow is slower or you prefer a more compact footprint, the HC-600’s width may feel overwhelming.

The Eureka Helios 65 suits smaller specialty cafes or roasteries with limited counter space. Its 1.2 kg hopper is sufficient for most shifts, and the 65 mm burr with 2.8, 3.8 g/s output ensures fast grinding. The narrower profile allows it to fit into tighter stations, but the deeper footprint requires careful planning. If you prioritize space efficiency over maximum bean capacity, the Eureka is the logical choice.

Where they differ

Specification A B What it changes in practice
Width 350 mm 220 mm The Eureka Helios 65 saves 130 mm of linear counter space, making it suitable for narrow stations where the HC-600 cannot fit.
Depth 210 mm 250 mm The HC-600’s shallower design keeps it closer to the backsplash, while the Eureka’s deeper profile may interfere with front-facing workflow.
Hopper Capacity 1,500 g 1,200 g The HC-600 holds 25% more beans, reducing refill frequency during high-volume shifts compared to the Eureka.
Power Draw 350 W 280 W The HC-600 has a higher connected load, requiring a circuit capable of handling the extra 70 W without tripping breakers.

Strengths and weak spots

Strengths Limitations
A - The 1.5 kg hopper capacity reduces refill interruptions during busy shifts.
- The 210 mm depth keeps the grinder close to the backsplash, preserving front counter space.
- The 350 mm width requires a wide counter run; skip it if your available width is less than 350 mm.
- The higher 350 W power draw may require a dedicated circuit upgrade in older kitchens.
B - The 220 mm width fits into narrow counter spaces where the HC-600 cannot.
- The 280 W power draw is lower, reducing electrical load and potential heat generation.
- The 1.2 kg hopper may require more frequent refills during high-volume service.
- The 250 mm depth may interfere with front-facing workflow or drawers; avoid this if you have limited depth clearance.

Which one for which kitchen?

A specialty café

In a specialty café, shot consistency and workflow are key. The Eureka Helios 65’s narrower width allows it to fit into tighter stations, preserving space for milk texturing and cup warming. Its 65 mm burr and micro-adjustable system provide precise grind control, essential for single-origin shots. The 1.2 kg hopper is sufficient for most specialty volumes, and the lower power draw reduces heat in a small space. The Anfim HC-600’s width may be too restrictive for some layouts.

Pick: Eureka Helios 65 Automatic Coffee Grinder, Black

A hotel breakfast service

Hotel breakfasts demand volume and simplicity. The Anfim HC-600’s 1.5 kg hopper and 2.5, 3.0 g/s grinding speed handle the rush without constant refills. Its dual-sided dispenser allows easy access for multiple baristas, and the 350 mm width accommodates the higher throughput. The Eureka Helios 65’s smaller hopper may become a bottleneck during peak hours, requiring frequent refills that slow down service. The HC-600’s solid capacity makes it the safer choice for high-volume, fast-paced environments.

Pick: Anfim HC-600 On Demand Coffee Grinder, 64 mm, Black

A roastery or tasting bar

Roasteries often prioritize process visibility and small-batch precision. The Eureka Helios 65’s compact footprint and 65 mm burr offer precise control for small batches, while its narrower width allows it to fit into tasting bars with limited counter space. The Anfim HC-600’s larger size may dominate a small tasting area, and its higher capacity is unnecessary for small-batch roasting. The Eureka’s lower power draw also reduces heat in a small, customer-facing space.

Pick: Eureka Helios 65 Automatic Coffee Grinder, Black

Before you order

  • Confirm the supply phase (single or three-phase) with the dealer before ordering: Neither spec sheet states the phase requirement, which is critical for proper installation and circuit design.
  • Verify the local voltage (220 V vs 230 V) matches the machine’s rating: The HC-600 requires 230 V, while the Helios 65 uses 220 V; mismatching voltages can damage the motor.
  • Measure the available counter depth, including clearance for door swings and workflow: The Eureka’s 250 mm depth and the HC-600’s 350 mm width have specific spatial requirements that must be met.
  • Check the warranty terms and service availability in your region: Warranty coverage and local service support vary by brand and region, impacting long-term ownership costs.
  • Assess the noise level in your specific kitchen environment: Neither spec sheet provides noise dB ratings, which can be critical for customer-facing spaces or open kitchens.

Our call

The choice between the Anfim HC-600 and Eureka Helios 65 hinges on your counter dimensions and volume needs. If you have a wide counter and high bean consumption, the HC-600’s 1.5 kg hopper and 350 mm width are ideal. For narrow spaces and lower volumes, the Eureka’s 220 mm width and 1.2 kg hopper offer a better fit. Always verify voltage and phase requirements before purchasing.

Questions we get asked

Can I install the Anfim HC-600 on a 220 V circuit?

No, the HC-600 is rated for 230 V. Installing it on a 220 V circuit may cause performance issues or damage. Verify your local voltage and consult an electrician before installation.

Does the Eureka Helios 65 require a dedicated circuit?

The Helios 65 draws 280 W, which is lower than the HC-600’s 350 W. While it may not always require a dedicated circuit, it is recommended to check your kitchen’s electrical load to avoid tripping breakers during peak use.

Which grinder is better for a small counter?

The Eureka Helios 65 is better for small counters due to its narrower 220 mm width. The Anfim HC-600 requires a minimum of 350 mm width, which may not fit in tighter spaces.

FindGastro Editorial · Commercial kitchen equipment editors

Author profile →